Untenstehend finden Sie die
Abbildungen zu allen derzeit lieferbaren Modulen in aufsteigender Reihenfolge
(Stand vom Januar 2005). Die Bilder sind
teilweise mit blauen LEDs versehen. Sie können bei Ihrer Bestellung bestimmen,
ob die Module mit roten LEDs (Standard-Version),
blauen
oder weißen LEDs (Sonderversionen
gegen Aufpreis) geliefert werden. Nur die Vactrol-Module (A-101-x) sind aus
technischen Gründen nur mit roten LEDs erhältlich.
Falls Sie
über das Graphik-Programm Corel-Draw™ (V7.0 oder höher) verfügen,
so gibt es eine wesentlich
komfortablere Methode, um Ihr eigenes
"virtuelles" A-100-System zusammenstellen. Hierfür haben wir eine Corel
Draw-Datei verfügbar, die alle derzeit erhältlichen A-100-Module und
einen leeren 6HE-Rahmen enthält. Sie können sich hiermit Ihr System zusammenstellen, indem Sie die
gewünschten Module an die vorgesehene Stelle im Rahmen
verschieben. Falls ein Modul doppelt benötigen kopieren Sie dieses
einfach mit STRG+C und STRG+V. Wenn Sie die Funktion "an Hilfslinien ausrichten"
aktivieren, wird das Modul automatisch im 19"-Raster richtig
plaziert. Der Link zu dem Corel-Draw-File lautet: A100_System.cdr
(~ 1.4 MB). |
Below you find
the pictures of all A-100 modules that are available at present (as of January
2005). The front panels are partly shown
with blue LEDs. You can decide if you want to obtain the modules with red
LEDs (standard version), blue
or white LEDs (special versions, additional charge). Only the vactrol based modules
(A-101-x) are not available with blue LEDs due to technical reasons.
If you have
available the graphic software Corel Draw™ (V7.0 or higher) there is a
more comfortable way to combine
your A-100 system. For this we have available a Corel Draw file that contains all
A-100 module
front panels that are available at present and an empty 6HU frame. This
file enables you to combine your own "virtual" A-100 system by
moving the modules to the desired position at the frame. Activate
"magnetic auxiliary lines" to align the front panels at the
right positions within the frame and use STRG+C/STRG+V to copy modules. This is the link to the
Corel Draw™
file: A100_System.cdr
(~ 1.4MB).
|